CLICC Self-Service Charging Stations
- Jade Tandoc
As of Winter 2024, CLICC is officially providing Self-Service Charging Stations for patrons to charge their phones. These are lockers which patrons will have to input a password to charge and retrieve their phones.
DISCLAIMER: CLICC and UCLA Library are not responsible for any damaged, lost, or stolen items stored in the self-service charging lockers. We are also not responsible for items left in lockers after hours. Please check https://www.library.ucla.edu/about/programs/campus-library-instructional-computing-commons-clicc/ for updated daily hours.
Location in Lab and RC
CLICC Lab (Powell 145)
Located upon entry next to digital signage display.
CLICC YRL Equipment Lending Station (YRL 11360E)
Located at the lending station desk.
How To Use Charging Stations
There is a sticker with step-by-step instructions below the digital panel.
To Charge Device
No. | Steps | Illustration |
|---|---|---|
1 | Click “Charge” - button in Blue as indicated in the illustration |
|
2 | Select a locker that is available.
|
|
3 | Input a passcode of patron’s choice.
Note: Patron will need this passcode to retrieve their phone |
|
4 | Press [OK] button. |
|
5 | Re-input the same password to confirm the password and press [OK] again. |
|
7 | The selected locker door will open for patron to plug in their phone and leave their phone in the locker. Note: Light will turn from blue to white at this stage. |
|
8 | Close the locker door and patron is good to go. |
|
To Retrieve Device
No. | Steps | Illustration |
|---|---|---|
1 | Click “Retrieve” - button in Yellow as indicated in the illustration |
|
2 | Select locker with patron’s device. |
|
3 | Input passcode. |
|
4 | Click [OK]. |
|
5 | Locker door will open and Patron can retrieve device. |
|